No more having to replace power supplies for my old led strips!! I had led strips for my "undercabinet" lighting for my desk. Lights were great and never had an issue with them, but I'd bet I had replaced 6-8 power supplies that failed since installing them. After the last one failed of my batch of three that I bought, I went hunting for a new light source. I was done. I found this unit and decided to give it a shot since it was a smart device and compatible with Alexa.Easy installation - You can either hard wire it to your electrical supply, or use the enclosed power cord. I opted for the power cord for my particular situation. WARNING: From what I gather if you prep the unit for hardwiring, once you pop off the cover and fittings there is no going back. You can't then choose to use the power cord. Make sure you are for sure hard wiring before removing anything. Power cord easily slides into its port and connects. There is only one way that it can go in. You can connect I think 6 of the 24" bars together on one power cord. You can choose to connect with a provided cable if you need space between each unit or you can connect them right next to each other using the butt connector supplied. I chose side by side. There is also a cap for the connection opening for the end unit so its not left open. Connection is a breeze. Same concept as the power cord. Only goes in one way and snaps in place. You can easily tell which end goes which way because it is clearly marked with input and output at each connector. Mounting screws are included and built right into the unit. No screws falling out, dropped hardware, etc. All around easy and convenient.Setup - This also was super easy. Initial setup is needed using the Cync app before its ready to be added to any smart home hubs or systems. Once it was setup with Cync, Alexa easily found the device and added it for me. From there I was able to create the routines and manage the settings I wanted. No try/fail/try/fail/try/success with either light like I have experienced with other smart devices. Just make sure your phone is connected to your 2.4Ghz wifi network which is standard for any smart home device I've ever connected.Size - 24" was a good length for my application. The unit is wider than I would like but not an issue and easily overlooked with its other features. I bought one to start with because I wasn't sure if two would fit under my desk armoire cabinet top. Yes, I could have measured the cabinet but I wasn't sure if the 24" was the entire light with enclosure or just the light bar or how much room I needed for the power cord sticking out the side. I got the first one, installed, measured and there was enough room for another unit so I bought the 2nd.Value - this is where it gets a little weird. The first one I bought was $38.66. Obviously I thought it was worth it and with the features it has it was more so. Then I went to go buy the second unit the day after I installed it. Suddenly it is no longer listed on the product page. Only the 12" and 18". They were only a few dollars less than the 24" so buying two 12" units wasn't optimal. Everywhere else I looked online, including GE's website, they were selling anywhere from $60 to $90. No way. A couple days later it reappeared on the product page, but for $66. Nope....not going to pay double. Finally found it on Lowe's for $36 and bought the 2nd one. A day later Lowe's prices nearly doubled. So weird. But, I'm happy with both for what I paid.Features - typical LED light with the ability to change colors, brightness, cool/warmth of the white lighting. It has some built in "Light Shows" that you can set which are cool novelties but I doubt I will ever use them

Great Cabinet Lights, easy to install and well made. Connection to my network and Alexa was super easy. Brightness is very good and the variety of colors are great. The app works well and is also easy to navigate through. Would definitely recommend to anyone looking to upgrade from the standard florescent undercabinet lights. For the price you can't go wrong.

We ordered one of these 18” units to hook up to two 24” units to complete our kitchen cabinet lighting and are very pleased. They can be controlled manually, by phone app, or by voice through a wireless home hub. I love the voice feature when my hands are full and I need to turn on the light. Lights are super bright for task lighting but can be dimmed to quite low settings in the evening. There are different temperatures of white to choose from, as well as a bunch of fun colors. You can turn them on as one long unit or individually. They were very easy to install, link together, and sync to the wireless. I was worried they would look kind of clunky but they’re fine. (I’m short so I actually see UNDER the cabinets). Not sure if I’ll ever need all the colorful settings in the kitchen, but the red and green colors might make an appearance next Christmas!

This GE Cync Reveal HD+ undercabinet light has been excellent. There’s no flickering at all, and it’s very bright with clean, even light that works perfectly for task lighting. It makes a noticeable difference in visibility and looks great once installed.I really like that it’s hardwired—no batteries to deal with and no charging. Once it’s in, it just works. It integrates smoothly with Google Home, responds quickly to commands, and makes adjusting brightness or color easy.The fixture feels durable and well-made, not flimsy or cheap. Installation was straightforward, and the finished look is clean and professional. Overall, it’s a reliable, high-quality undercabinet light that delivers on performance and smart features.Highly recommended if you want bright, dependable lighting with smart control and no battery hassle

the lights are great and low profile. they can easily connect to each other. i use them with alexa and programmed routines. the mount screw is in the unit already. you just line it up and screw in. the only issue i had was connecting. the app they use starts out asking what you have. the first option is lighting. that will get you nowhere. i finally figured out that after the generic lighting option, down the list, is undercabinet lighting. that works. i would buy again if i want more.

We bought two units to replace the basic ones we installed with the home. We also like smart-enabled lighting, so these were the perfect fit.We prefer to use a central hub for smart devices. SmartThings is the hub of choice, and Alexa is the voice assistant for voice control. If you don't have that kind of setup, it's A-OK. Once you set up your lights in Cync, go to Alexa and look for the Cync skill. Authenticate and approve access. Alexa will pick up the new devices almost instantly.They look great as undercabinet lighting and function perfectly. The ability to dim, apply themes, automate lighting schedules, and control them via voice is a fantastic convenience. Despite a lack of competitors in this space, these units are priced exceptionally well and reasonably—we feel they are worth every penny. The way the lights diffuse light into the acrylic panel makes it appear as a smooth light source with no "harsh" visible individual LEDs that plague most fixtures when viewed from different angles. Try their Reveal mode to see a different spectrum of lighting that enhances visuals. I would keep it enabled were it not for the lighting on my stove. I want them to match when daylight white is on, and that is the only way for me to achieve that.Now that we know about GE's smart lighting line, we're going to shop for more of their goods. Thus far, they've been of great quality and at a much more competitive price point.The physical installation of these units was much more straightforward than I thought it might be, given some review comments. Here are some guidelines and feedback:* First, plug the units in with the provided wall cable. Then, set up and configure your lights using the Cync app. This process ensures you don't have to deal with resets, etc., if you have trouble. It's the same if you intend to use them with HomeKit. I did not have issues pairing with the Cync app AND Matter, but some reviewers have suggested they are mutually exclusive. I tested it, and it worked, but then I removed them from HomeKit (as I don't use it). Download the Cync app from your app store to configure using the app. Select the option to add devices and then scroll down to undercabinet fixtures. They should pop up immediately. Set their properties, save, and let the units update their firmware while at it. After this step, you can proceed to hardwire if desired.* We wanted ours hardwired. POWER OFF YOUR CIRCUIT. Then, remove the back plate by removing the screw in the back of the unit. The plate will come loose. The wires to the unit are tucked just inside. Pull each of them out by their push-in connectors. There will be a green, white, and black one. The fixtures come with two-port push-in connectors. If you insert wires (from the wall) that are too long, it will be challenging to remove them later. Keep the slack from the wall wires long enough to work with the fixture, and you won't have this problem. I would only keep 5-6" of slack. Once trimmed, plug the wires into their corresponding units, and you're done with power. I learned this the hard way for the first fixture. If you forgot and need to open the unit, unscrew the access plate (there is a tiny screw on each side on the bottom of the unit) and reattach the plate once the wires are secured.* Position the unit and prepare to screw it in. However, before you do, I recommend having the screws partially exposed when positioning. You can then apply some pressure on the screw to imprint on the cabinet (or mounting surface). Then you can drill some pilot holes to ensure you don't break the screws. This was a concern one other owner mentioned. Each fixture should take about 15 minutes, but your mileage may vary.

I'm pleasantly surprised with the ease of setup of these lights. Install was also super easy - the screws are built in and they easily pierce through the cabinet wood.I did utilize the corded install rather than direct wire, which is also included. These aren't battery powered. No motion detection. They seem to be a reasonable price for what they are and I like that they are GE brand.I put them under all of my wall cabinets and am using the Cync app. They do have Matter but I had issues pairing with Smartthings, so just did Cync and linked Cync to Google Home. It all seems to work well with voice control. The lighting is good, they all turn on/off together. While they do have color effects, it doesn't recognize the location of each light and do different effects on each like Twinkly and Govee.

These lights have all the features you could want: low profile, full color and warmth LEDs, smart control and integration with Alexa, Google, and Siri. No special hub/bridge needed.

Easy to install. Has a number of options including bright and low light and a number of colors.It’s great that it works with Alexa.