CONDITION: Open Box
Item is in open or damaged packaging and has not been tested. Item may show signs of handling and may be missing parts or accessories.
Returns Accepted
We accept returns under specific cicumstances.
See return policy for details
BATHROOM SINK FAUCET, FAUCET FOR BATHROOM SINK, WIDESPREAD BRUSHED NICKEL BATHROOM FAUCET 3 HOLE WITH STAINLESS STEEL POP UP DRAIN AND CUPC LEAD-FREE HOSE – (BRUSHED NICKEL)
BATHROOM SINK FAUCET... see more >
This auction has ended.
View more auctions
I purchased these over two years ago and they have been flawless. They replaced faucets with failed cartridges, and were only slightly more expensive than a couple of cartridges, so I figured I'd take a chance on them. I'm so glad I did. They were easy to install, look great, work well and have had zero issues after two and a half years. I also really like the pop-up drain that is easily removable for cleaning.
Very nice quality looks and feels like way way more expensive. Solid construction, super easy to install. Just a couple of installation comments. I one prior and will install these two in a home built in 1985, with Price Pfister faucets dating to then, with nuts securing the parts from underneath the vanity top. If yours is like mine, plan on 2 1/2 hours to get the old ones out. You will need Kroil penetrating oil on the rusted, frozen nuts, and a Basin Wrench designed specifically to reach the nut holding the spout in the nearly in accessible narrow gap between the sink basin and the wall. Kroil is the best penetrating oil in the world and helped loosen mine. You can buy a basin wrench here on AMZ for $X, or at Harbor Freight if you have one near you for $6.00. Next thing is orientation of the water handles. I do not recall it being mentioned that you need to check orientation of the water handles... parallel to wall when closed so that it will open turning 90 degrees toward you. I got mine all in place, snugged down, assuming that they were in closed position only to find that they weren't. But it was a simple matter to loosen the set screws, turn, and retighten.The "nuts" that secure the valves and spout are sheer genius with set screws. You just spin them on hand tight and then tighten down on the set screws to hold in place. The set screws are plenty long to reach and hold when the "nut" cannot be completely tightened down when the "ears" bump into the edge of the basin, if the holes in your installation are close to the edge of the basin. Great product, I hope they are durable. I am a bit concerned that some have reported failure and flood. I will likely buy leak detectors at SimpliSafe for each just in case. We use cheap battery sensors and have SimpliSafe sensors connected to their system at major potential leak points. See picture of basin wrench.
Our old, name brand, faucets developed an annoying dripping. I replaced the cartridges several times but the leaking continued. So we bought this pair of faucets as we loved the appearance and the price. Install was mostly easy but I had to fit myself under the sink in a cabinet which makes for tight working conditions. I removed the old faucet cleaned up the area and cleaned out the P trap. Install of the new faucet was very easy and the nuts tightened down easily on the handles and faucet. The adjustable wrench I had had to tighten the nuts had enough clearance to make this pretty easy. I tried installing the drain pipe with the supplied rubber gasket (between the drain and the sink bowl) but it was NOT water tight and leaked. Plumbers putty was tried but the sharp angle of the drain made that difficult as well and again I had leakage. So clear silicon caulking was called into duty. I try to avoid silicon caulking as it makes removing the drain a much more difficult task down the road when you need to replace the drain again. But it works very well and did so in this case as well, I had to use quite a bit tho. One big difference I noticed between the old faucet drain and the new one is the threading on the pipe for the nut under the bowl to clamp the drain tightly to the bowl. The old drain pipe the threading was very well defined with tightly spaced threads. The new drain had much coarser threads with a slightly rounded off peak. I added a photo trying to show this. I added Teflon tape to the new drain threads and tightened up everything as tight as I dared. Ran water through and after a minute or so I noticed a tiny drop leaking between the nut and threads (see photo). So I loosened the nut and lowered it and added even more teflon tape to the threads of the pipe. I then retightened the nut and tested with water and now NO more leaks. So with the courser and more rounded threads of this drain pipe you'll need to add more teflon tape than you think. I did read some reviews about the snap on joint of the water line to the faucets being poor or very difficult to connect. Well the space I was working in was tight but through trial and error I was able to get a grip on the handle waterline and the faucet water lines and the connection of the two was easier and very solid. No leaks what so ever. The real issue is the tight, small working conditions not the joints themselves. After 4 months of use we are extremely happy with these faucets. The finish quality is great and they clean up very easy. 5 stars all the way.
Works for bathroom vanities. It was a little difficult to put in due to the limited stages between the basin and holes for the faucet.I did have some leak problems between the drain and strainer. I used some plumbers putty and a big wrench to really tighten it up. I have not had any leaks since then.We will see how the plastic connectors last as we have harsh water that builds up quick.But easy to put on by yourself and even easier with some help. Make sure you have a large adjustable wrench to really tighten the tailpiece.Good quality for price and matches bathroom hardware well.
Excellent product, easy to install, comes with all you need to complete an installation. however, it would be great if they threw in some silicone to seal the drain pipe during the install, those tend to leak more often than not, that would make this a total package. Looks great, good price.
Good product and easy to install
El grifo y los manerales para el lavabo de la recámara tienen un diseño muy bonito. El tono (oro lijado) está algo encendido, se vería mejor un dorado menos amarillo, sin embargo no se ve mal. Me gusta la rapidez y puntualidad de Amazon para surtir en la Ciudad de México.
Qualità soddisfacente e facile da istallare.
Works great and easy to install
Era justo lo que esperaba, me gusto mucho, lo recomiendo
-
Brand
Hosslly -
Recommended Uses For Product
Bathroom -
Mounting Type
Deck Mount -
Finish Type
Brushed -
Material
Metal -
Color
Brushed Nickel -
Number of Handles
2 -
Included Components
Drain, Handle, Instruction Manual, Y pipe, braided hose -
Hole Count
3 -
Special Feature
Lead Free, Pop Up Drain -
Style
Silver -
Installation Type
Widespread -
Maximum Flow Rate
1.5 Gallons Per Minute -
Model Name
0QEP9OAF -
Number of Pieces
3 -
Handle Material
Metal -
Spout Height
3.2 Inches -
Spout Reach
5.27 Inches -
Item Weight
4.4 Pounds -
Warranty Type
limited -
Handle Location
Left and Right -
Speaker Cutout Diameter or Length
1.38 Inches -
Spout Design
Straight -
Manufacturer
Hosslly -
Room Type
Bathroom -
Product Dimensions
8"D x 5.27"W x 4.94"H -
Part Number
0QEP9OAF -
Item model number
0QEP9OAF -
Size
8 Inch 1 Pack -
Finish
Brushed -
Item Package Quantity
1 -
Hose Length
1.38 Inches -
Coverage
6"-12" -
Special Features
Lead Free, Pop Up Drain -
Batteries Included?
No -
Batteries Required?
No -
ASIN
B0915FV97Z -
Best Sellers Rank
#4,497 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #10 in Touch On Bathroom Sink Faucets -
Date First Available
March 26, 2021 -
Recent Sales
500+ bought in past month
Buyer’s Premium
A 15% buyer’s premium will be added to the sale price of all purchases.
Store Auction Lots Condition
All items are uninspected and the condition is unknown unless otherwise explicitly stated. Items labeled as “Open Box” may have been previously opened, handled, returned, or repackaged. Packaging may be damaged, incomplete, or missing, and items may show signs of handling or cosmetic wear. Items are not tested unless specifically noted. Individual items are available for inspection at Korting Outlet located at 159 1st Court, Grand Rapids, Michigan 49534 during store hours.
The highest bids serve as legally binding contracts, and all sales are considered final. Items are sold on an “as is” basis, without any guarantees, warranties, or the possibility of refunds, whether written, expressed, or implied. The operational condition of an item may not be known or listed in the item description. While we may provide information on the condition of some items, including items marked as “New,” such information is not guaranteed.
All items are sold with all faults and without any warranty, whether expressed or implied, regarding merchantability or fitness for a particular purpose. The sale is conducted on an “as is, where is” basis with all faults. Buyers are strongly encouraged to physically inspect items before placing bids during the inspection period. Once submitted, bids cannot be withdrawn before, during, or after the auction for any reason.
The buyer acknowledges that these terms, along with other terms outlined below, can only be amended or revised in writing, signed by the auctioneer. Any representations made by Korting or its agents do not alter these “as is, where is with all faults” terms. Descriptions provided on products or through advertising, including condition labels such as “New,” are not guaranteed, and buyers rely solely on their own inspection. While information in sale advertising is believed to be accurate, Korting assumes no responsibility for errors or omissions.
Auction Closing Times
Posted closing times are in Eastern Time and may be extended through dynamic bidding. Dynamic bidding extends the auction close time until there are five minutes without bidding activity. Korting reserves the right to close early or extend auctions at its discretion.
Payment
Payments will be processed through Stripe.
Refund Policy
Due to the nature of liquidation merchandise, returns are accepted only under the following circumstances:
- Wrong item received
- Major undisclosed damage that significantly affects functionality or value
- Item arrives nonfunctional or dead on arrival (unless listed as untested, for parts, or salvage)
- Missing critical components necessary for basic operation that were not disclosed in the listing
- Counterfeit items or items materially different from the listing description
The following conditions are not eligible for return or refund:
- Buyer’s remorse or accidental purchases
- Minor cosmetic wear, scratches, dents, scuffs, or signs of prior handling
- Damaged, worn, or missing retail packaging
- Compatibility issues with buyer equipment, software, or intended use
- Missing non-essential accessories, manuals, inserts, cables, or packaging materials unless specifically stated in the listing
All return requests must be submitted within 72 hours of delivery and include clear photos and/or video documentation of the issue. We reserve the right to deny returns that do not meet the above criteria.
.
Sales Tax
All orders are subject to the 6% Michigan sales tax. Tax-exempt buyers must have a current tax-exempt certificate on file before sales tax can be removed from an invoice.
Failure to Pay or Remove Items
Korting reserves the right to charge a 15% non-refundable restocking fee for items not paid for and picked up within seven days of the auction closing. Such items will be considered abandoned and forfeited to Korting. Korting may resell any abandoned or forfeited items.






