No more having to replace power supplies for my old led strips!! I had led strips for my "undercabinet" lighting for my desk. Lights were great and never had an issue with them, but I'd bet I had replaced 6-8 power supplies that failed since installing them. After the last one failed of my batch of three that I bought, I went hunting for a new light source. I was done. I found this unit and decided to give it a shot since it was a smart device and compatible with Alexa.Easy installation - You can either hard wire it to your electrical supply, or use the enclosed power cord. I opted for the power cord for my particular situation. WARNING: From what I gather if you prep the unit for hardwiring, once you pop off the cover and fittings there is no going back. You can't then choose to use the power cord. Make sure you are for sure hard wiring before removing anything. Power cord easily slides into its port and connects. There is only one way that it can go in. You can connect I think 6 of the 24" bars together on one power cord. You can choose to connect with a provided cable if you need space between each unit or you can connect them right next to each other using the butt connector supplied. I chose side by side. There is also a cap for the connection opening for the end unit so its not left open. Connection is a breeze. Same concept as the power cord. Only goes in one way and snaps in place. You can easily tell which end goes which way because it is clearly marked with input and output at each connector. Mounting screws are included and built right into the unit. No screws falling out, dropped hardware, etc. All around easy and convenient.Setup - This also was super easy. Initial setup is needed using the Cync app before its ready to be added to any smart home hubs or systems. Once it was setup with Cync, Alexa easily found the device and added it for me. From there I was able to create the routines and manage the settings I wanted. No try/fail/try/fail/try/success with either light like I have experienced with other smart devices. Just make sure your phone is connected to your 2.4Ghz wifi network which is standard for any smart home device I've ever connected.Size - 24" was a good length for my application. The unit is wider than I would like but not an issue and easily overlooked with its other features. I bought one to start with because I wasn't sure if two would fit under my desk armoire cabinet top. Yes, I could have measured the cabinet but I wasn't sure if the 24" was the entire light with enclosure or just the light bar or how much room I needed for the power cord sticking out the side. I got the first one, installed, measured and there was enough room for another unit so I bought the 2nd.Value - this is where it gets a little weird. The first one I bought was $38.66. Obviously I thought it was worth it and with the features it has it was more so. Then I went to go buy the second unit the day after I installed it. Suddenly it is no longer listed on the product page. Only the 12" and 18". They were only a few dollars less than the 24" so buying two 12" units wasn't optimal. Everywhere else I looked online, including GE's website, they were selling anywhere from $60 to $90. No way. A couple days later it reappeared on the product page, but for $66. Nope....not going to pay double. Finally found it on Lowe's for $36 and bought the 2nd one. A day later Lowe's prices nearly doubled. So weird. But, I'm happy with both for what I paid.Features - typical LED light with the ability to change colors, brightness, cool/warmth of the white lighting. It has some built in "Light Shows" that you can set which are cool novelties but I doubt I will ever use them

This GE Cync Reveal HD+ undercabinet light has been excellent. There’s no flickering at all, and it’s very bright with clean, even light that works perfectly for task lighting. It makes a noticeable difference in visibility and looks great once installed.I really like that it’s hardwired—no batteries to deal with and no charging. Once it’s in, it just works. It integrates smoothly with Google Home, responds quickly to commands, and makes adjusting brightness or color easy.The fixture feels durable and well-made, not flimsy or cheap. Installation was straightforward, and the finished look is clean and professional. Overall, it’s a reliable, high-quality undercabinet light that delivers on performance and smart features.Highly recommended if you want bright, dependable lighting with smart control and no battery hassle

Great Cabinet Lights, easy to install and well made. Connection to my network and Alexa was super easy. Brightness is very good and the variety of colors are great. The app works well and is also easy to navigate through. Would definitely recommend to anyone looking to upgrade from the standard florescent undercabinet lights. For the price you can't go wrong.

We ordered one of these 18” units to hook up to two 24” units to complete our kitchen cabinet lighting and are very pleased. They can be controlled manually, by phone app, or by voice through a wireless home hub. I love the voice feature when my hands are full and I need to turn on the light. Lights are super bright for task lighting but can be dimmed to quite low settings in the evening. There are different temperatures of white to choose from, as well as a bunch of fun colors. You can turn them on as one long unit or individually. They were very easy to install, link together, and sync to the wireless. I was worried they would look kind of clunky but they’re fine. (I’m short so I actually see UNDER the cabinets). Not sure if I’ll ever need all the colorful settings in the kitchen, but the red and green colors might make an appearance next Christmas!

Easy to install. Has a number of options including bright and low light and a number of colors.It’s great that it works with Alexa.