CONDITION: New
Item is brand new and factory sealed in original packaging. Contents have not been opened or used.
Returns Accepted
We accept returns under specific cicumstances.
See return policy for details
RHEEM SP20286 3 VENT TERMINATION KIT , BEIGE
RHEEM SP20286 3 VENT... see more >
Bidding Starts At
$5.99
Create an account to place a pre-bid
Already have an account? Log in here
Pickup Information
Product Description Rheem SP20286 3 Vent Termination Kit From the Manufacturer The Rheem SP20286 is a 3-inch vent termination. HVAC replacement part Rheem SP20286. Get your system working properly once again with replacement parts.
View more auctions
I like the clean look better than the unfinished look of pvc sticking out of the house. Easy to Install and works as suggested.
I received this today, looks like a good design. I was in a hurry and drilled the holes in my house before it arrived. Relied upon some of the reviews here for guidance, and guess what... they were wrong. So I though I would share some dimensions so others don't make the same mistake.- holes are exact size for 3" PVC OD- Holes are spaced 5 1/2 inches center to center- The base plate is 5 1/2 x 11 inches, with some little tabs that hang off the top and bottom and sides.It would be GREAT if the manufacture had a downloadable PDF with the template on it, but short of that - please use these dimensions to drill your holes. Not 4" on center as other reviews say!
Looks great, works great.
I just installed a Rheem tankless water heater. Since my old water heater (an Aquastar, more of a "water warmer") had a horizontal exhaust I followed the same principle and terminated the exhaust and the intake with the above Termination Kit. It's very easy to install and avoids the necessity to have one of the pipes stick out 12" or more.
This is a great unit, they also make one which is for 2 inch pipe; this one is for 3 inch pipe.This unit is a must have terminator for a Rheem or other brand Tankless Hot Water or Boiler install. It just leads to a cleaner look.The Pro(s):- Clean/Minimalistic look.- Keeps lager critters out.- As a matter of design takes the intake air from a different area/flow than the exhaust air.The Con(s):- Not much in the way of trim; your cuts better be dead on or you'll have a gap which is near impossible to fill.- Near impossible to trim to certain kinds of siding.- Inside portion is too small to render the device water tight or at least rain resistant.- Not undercut to let any water that gets in to readily drain out; any water would be directed toward the unit.
It worked as described. I will need to paint it in the spring to blend in better on the side of the house, but it looks a lot better than having two pipes and nothing else like the neighbors house. They want to get one and have it installed now.
Here's the deal when it come to this device You MUST HAVE IT BEFORE YOU INSTALL YOUR TANKLESS WATER HEATER!!Like another reviewer mentioned the spacing of this does not match Rheem's tankless water heaters that use 3" PVC for intake and Exhaust. You can use this if you reroute the pipes to achieve the necessary spacing. If you already installed your tankless water heater or furnace for that matter you need to check the spacing of you intake and exhaust pipes prior to ordering this or you'll have a nice but useless piece of plastic.Luckily for me I'm putting in a high efficiency furnace also so while I was hoping to use this on my tankless water heater I'll use it for that instead.
Much easier to install then previous models. Last one I installed required me to use 2 22.5 deg elbows to compensate for the offset. This on required 2 90 deg elbows and straight outside through a cinder block wall
Easy to install. A much cleaner finish on building exterior, than pipe with elbows.
Great termination. Very good looking on side of house, much nicer than big the ugly pipes the manufacturer want you to terminate with. Would recommend.
nice tight clearance around the exhaust pipes
Easy to install. Looks great. Love the neat look. Not the messy look of pipes just hanging out of the walls
Installed easily and gives a nice finished look!
-
Material
Metal -
Brand
Rheem -
Item dimensions L x W x H
12 x 12 x 5.5 inches -
Exterior Finish
PVC -
Inlet Connection Size
3 inches -
Inlet Connection Type
National Pipe Tapered -
Outlet Connection Type
NPT -
Number of Ports
2 -
Outlet Connection Size
3 inches -
Specification Met
certified frustration-free -
Thread Size
3 inch -
Thread Type
NPT -
Connector Type
Flush mounts to your outside wall -
Item Dimensions
12 x 12 x 5.5 inches -
Item Weight
16 ounces -
Size
1 Count (Pack of 1) -
Material Type
Metal -
Brand Name
Rheem -
Model Number
SP20286 -
Global Trade Identification Number
00662766462715 -
Unit Count
1 Count -
Manufacturer
Rheem -
UPC
662766462715 020352601649 -
Item Type Name
Rheem SP20286 3 Vent Termination Kit -
Number of Pieces
1 -
Set Name
Rheem SP20286 3 Vent Termination Kit -
Manufacturer Part Number
SP20286 -
Best Sellers Rank
#617,570 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #1,533 in Water Heater Replacement Parts -
ASIN
B00G2DL8LO -
GTIN
662766462715 020352601649
Buyer’s Premium
A 15% buyer’s premium will be added to the sale price of all purchases.
Store Auction Lots Condition
All items are uninspected and the condition is unknown unless otherwise explicitly stated. Items labeled as “New” are believed to be unused and in original manufacturer packaging; however, packaging may show signs of storage or handling, and items are not tested unless specifically noted. Individual items are available for inspection at Korting Outlet located at 159 1st Court, Grand Rapids, Michigan 49534 during store hours.
The highest bids serve as legally binding contracts, and all sales are considered final. Items are sold on an “as is” basis, without any guarantees, warranties, or the possibility of refunds, whether written, expressed, or implied. The operational condition of an item may not be known or listed in the item description. While we may provide information on the condition of some items, including items marked as “New,” such information is not guaranteed.
All items are sold with all faults and without any warranty, whether expressed or implied, regarding merchantability or fitness for a particular purpose. The sale is conducted on an “as is, where is” basis with all faults. Buyers are strongly encouraged to physically inspect items before placing bids during the inspection period. Once submitted, bids cannot be withdrawn before, during, or after the auction for any reason.
The buyer acknowledges that these terms, along with other terms outlined below, can only be amended or revised in writing, signed by the auctioneer. Any representations made by Korting or its agents do not alter these “as is, where is with all faults” terms. Descriptions provided on products or through advertising, including condition labels such as “New,” are not guaranteed, and buyers rely solely on their own inspection. While information in sale advertising is believed to be accurate, Korting assumes no responsibility for errors or omissions.
Auction Closing Times
Posted closing times are in Eastern Time and may be extended through dynamic bidding. Dynamic bidding extends the auction close time until there are five minutes without bidding activity. Korting reserves the right to close early or extend auctions at its discretion.
Payment
Payments will be processed through Stripe.
Refund Policy
Due to the nature of liquidation merchandise, returns are accepted only under the following circumstances:
- Wrong item received
- Major undisclosed damage that significantly affects functionality or value
- Item arrives nonfunctional or dead on arrival (unless listed as untested, for parts, or salvage)
- Missing critical components necessary for basic operation that were not disclosed in the listing
- Counterfeit items or items materially different from the listing description
The following conditions are not eligible for return or refund:
- Buyer’s remorse or accidental purchases
- Minor cosmetic wear, scratches, dents, scuffs, or signs of prior handling
- Damaged, worn, or missing retail packaging
- Compatibility issues with buyer equipment, software, or intended use
- Missing non-essential accessories, manuals, inserts, cables, or packaging materials unless specifically stated in the listing
All return requests must be submitted within 72 hours of delivery and include clear photos and/or video documentation of the issue. We reserve the right to deny returns that do not meet the above criteria.
Sales Tax
All orders are subject to the 6% Michigan sales tax. Tax-exempt buyers must have a current tax-exempt certificate on file before sales tax can be removed from an invoice.
Failure to Pay or Remove Items
Korting reserves the right to charge a 15% non-refundable restocking fee for items not paid for and picked up within seven days of the auction closing. Such items will be considered abandoned and forfeited to Korting. Korting may resell any abandoned or forfeited items.