No more having to replace power supplies for my old led strips!! I had led strips for my "undercabinet" lighting for my desk. Lights were great and never had an issue with them, but I'd bet I had replaced 6-8 power supplies that failed since installing them. After the last one failed of my batch of three that I bought, I went hunting for a new light source. I was done. I found this unit and decided to give it a shot since it was a smart device and compatible with Alexa.Easy installation - You can either hard wire it to your electrical supply, or use the enclosed power cord. I opted for the power cord for my particular situation. WARNING: From what I gather if you prep the unit for hardwiring, once you pop off the cover and fittings there is no going back. You can't then choose to use the power cord. Make sure you are for sure hard wiring before removing anything. Power cord easily slides into its port and connects. There is only one way that it can go in. You can connect I think 6 of the 24" bars together on one power cord. You can choose to connect with a provided cable if you need space between each unit or you can connect them right next to each other using the butt connector supplied. I chose side by side. There is also a cap for the connection opening for the end unit so its not left open. Connection is a breeze. Same concept as the power cord. Only goes in one way and snaps in place. You can easily tell which end goes which way because it is clearly marked with input and output at each connector. Mounting screws are included and built right into the unit. No screws falling out, dropped hardware, etc. All around easy and convenient.Setup - This also was super easy. Initial setup is needed using the Cync app before its ready to be added to any smart home hubs or systems. Once it was setup with Cync, Alexa easily found the device and added it for me. From there I was able to create the routines and manage the settings I wanted. No try/fail/try/fail/try/success with either light like I have experienced with other smart devices. Just make sure your phone is connected to your 2.4Ghz wifi network which is standard for any smart home device I've ever connected.Size - 24" was a good length for my application. The unit is wider than I would like but not an issue and easily overlooked with its other features. I bought one to start with because I wasn't sure if two would fit under my desk armoire cabinet top. Yes, I could have measured the cabinet but I wasn't sure if the 24" was the entire light with enclosure or just the light bar or how much room I needed for the power cord sticking out the side. I got the first one, installed, measured and there was enough room for another unit so I bought the 2nd.Value - this is where it gets a little weird. The first one I bought was $38.66. Obviously I thought it was worth it and with the features it has it was more so. Then I went to go buy the second unit the day after I installed it. Suddenly it is no longer listed on the product page. Only the 12" and 18". They were only a few dollars less than the 24" so buying two 12" units wasn't optimal. Everywhere else I looked online, including GE's website, they were selling anywhere from $60 to $90. No way. A couple days later it reappeared on the product page, but for $66. Nope....not going to pay double. Finally found it on Lowe's for $36 and bought the 2nd one. A day later Lowe's prices nearly doubled. So weird. But, I'm happy with both for what I paid.Features - typical LED light with the ability to change colors, brightness, cool/warmth of the white lighting. It has some built in "Light Shows" that you can set which are cool novelties but I doubt I will ever use them

Great Cabinet Lights, easy to install and well made. Connection to my network and Alexa was super easy. Brightness is very good and the variety of colors are great. The app works well and is also easy to navigate through. Would definitely recommend to anyone looking to upgrade from the standard florescent undercabinet lights. For the price you can't go wrong.

We ordered one of these 18” units to hook up to two 24” units to complete our kitchen cabinet lighting and are very pleased. They can be controlled manually, by phone app, or by voice through a wireless home hub. I love the voice feature when my hands are full and I need to turn on the light. Lights are super bright for task lighting but can be dimmed to quite low settings in the evening. There are different temperatures of white to choose from, as well as a bunch of fun colors. You can turn them on as one long unit or individually. They were very easy to install, link together, and sync to the wireless. I was worried they would look kind of clunky but they’re fine. (I’m short so I actually see UNDER the cabinets). Not sure if I’ll ever need all the colorful settings in the kitchen, but the red and green colors might make an appearance next Christmas!

These lights solved my under cabinet lighting dilemma. I have six cabinets that I wanted to have lighting but none of them were set up to connect multiple lights together. Found these and the smart feature solved it. I honestly wasn’t excited to add a new app to my phone but the app made the connecting SO simple. No flicking switches on and off over and over and all the other pains when installing smart lights. Just use the connection feature and it finds all the lights prompts you to name them and build a group. Then is nice enough to ask if you want to add to Google Home or Alexa. I love all the brightness and color options. Very pleased with these. Totally worth the price.

I installed these in our renovated kitchen and they look great. The Cync app lets you control the colors and brightness easily, and they are not difficult to install. But a few things to know and consider before paying extra for these features.If you are connecting light units (which is very common in kitchens), the units must be linked starting from right to left. This means you need to use a plug the rightmost unit is near, or you need to rough-in your lines at the right hand cabinet in the run. I wish I knew that when I roughed in my electric - I had to move one line about a foot, and luckily I had an extra long pigtail to make it - just.The lights are dimmable, but ONLY through the app. This was not apparent, so I had to switch out the nice Sunnata dimmer switch with a regular one. If you want to have bright light while working, then dim it later, there’s no way to do this except by manually dimming every light, or using the app. Fortunately you can use Alexa or other DA to do this, if you have found one that doesn’t mess up all the time.The app supports scheduling the lights, which I thought was cool. I set it up to turn them on slowly an hour before sunrise or sunset, and fade out either an hour after sunrise, or an hour after our usual bedtime. But this morning was rainy, and the lights had dimmed to nothing when I wanted to turn them on. Can’t do this from the switch. You must go to the app, or your DA to do it. There’s no shortcut of just flipping a switch on - if you use the app and schedules, the switch must always be on or the lights cannot connect to the app. And setting up a dozen lights isn’t something the app can do in parallel or batch mode - you must go through each light, which wouldn’t be too bad except it means you have to wait a long time for each light to check if there is a firmware update, then timeout, then finally update.Other than the constraint of having to wire from right to left, users who have fully smart homes should be happy with these lights. But if you’ve given up on fighting with Alexa, be warned.

Absolutely a great under cabinet light. I couldn’t find anything even close to what this light offers at any price, but this was a great price for what you get.I had a 48 inch wide cabinet above and was thinking I should have bought the next size longer, but this puts out the perfect amount of light. The linking app works great and it’s very easy to change colors and brightness through the app. The light remembers the last setting and stays that way until you change it.Highly recommend, you won’t be disappointed.

This GE Cync Reveal HD+ undercabinet light has been excellent. There’s no flickering at all, and it’s very bright with clean, even light that works perfectly for task lighting. It makes a noticeable difference in visibility and looks great once installed.I really like that it’s hardwired—no batteries to deal with and no charging. Once it’s in, it just works. It integrates smoothly with Google Home, responds quickly to commands, and makes adjusting brightness or color easy.The fixture feels durable and well-made, not flimsy or cheap. Installation was straightforward, and the finished look is clean and professional. Overall, it’s a reliable, high-quality undercabinet light that delivers on performance and smart features.Highly recommended if you want bright, dependable lighting with smart control and no battery hassle

I'm pleasantly surprised with the ease of setup of these lights. Install was also super easy - the screws are built in and they easily pierce through the cabinet wood.I did utilize the corded install rather than direct wire, which is also included. These aren't battery powered. No motion detection. They seem to be a reasonable price for what they are and I like that they are GE brand.I put them under all of my wall cabinets and am using the Cync app. They do have Matter but I had issues pairing with Smartthings, so just did Cync and linked Cync to Google Home. It all seems to work well with voice control. The lighting is good, they all turn on/off together. While they do have color effects, it doesn't recognize the location of each light and do different effects on each like Twinkly and Govee.

Easy to install. Has a number of options including bright and low light and a number of colors.It’s great that it works with Alexa.