The light is nice and lit the hallway much nicer than my old fixture which burnt out those small global bulbs every month. There are a few things to care for when installing. It took about 10 minutes from start to finish, and I offer these steps to help you do so too.1. Have a separate light source so you can see what you are doing.2. Make sure there is at least 4 inches of source black/white wiring to be able to work it in place3. Do not use the 3 felt feet as it puts a space between the fixture and the ceiling and it wont catch the bracket.I removed the old fixture and pulled the black/white wires out as long as possible.I removed the wire cover from the new light, and the mounting plate tooI then used the 2 screws that provided to attach the plate to the existing mounting bracket inside the existing fixture. Make sure the new bracket sits flush to the ceiling and doesn't creep into the hole, else the flanges do not stick out enough and won't catch on the light.I attached the new bracket and stuck the wires into the holes (Black = L, white = N). I gave them a tug to be sure they wont come out.** While now hanging from the ceiling I tested the light.I then put the wire cover back on. I had to use a stubby screw driver since you have very little room to work, but it only took 10 turns or so to get it in.** Once it's screwed on test the light again!!! Sometimes the wire may come out if you didn't push it in hard enough.Then I lifted the light over one of the bracket clips (I suggest the one that is "closest" to the ceiling hole). If the light cannot "catch" the first clip, then you need to loosen the screw a few turns to allow the bracket to be less flush to the ceiling.Once I got the bracket under one of the clips , I pulled the metal "bracket release" and lifted the other end of the light and push it against the ceiling with some force to ensure it's flat. I then let the catch release go and it grabbed the light... took a few times. The light was then holding nicely and I was done.People complain about the battery cover being hard to put back on. If the wire out of the ceiling is too short then simply put a longer dongle/wire and you should be fine.People also complain about the light not being able to grab the bracket... you cannot use the felt feet and you may have to not tighten the bracket too hard against the ceiling.All in all it took just some care and an extra try or two to get it mounted. A little more effort but for the price it was worth it.

Doing great! It puts out a lot of light. Working great so far. Keep the faith!!

I like this light. I'm happy with the look, the form factor, and the twist-on, flush ceiling mount.It gives off a bright white light, perfect for a big kitchen.NOTES:Some might find it too bright for a small area, unless they are looking to do detail work and need a lot of white, "daylight" light. We have a large kitchen and we like it bright. This light fixture replaced an aging overhead light with two round fluorescent bulbs (one large 12 inch, combined with one small 8 inch).Also, I knew this new fixture might not match our old fixture's "footprint" on our kitchen ceiling so I had no worries about that, but some might not be happy if a 13 inch fixture does not cover their old fixture's opening, etc. It may mean drywall work, spackling and painting.The mounting plate and hardware were all in the package, and the mounting plate had a LOT of mounting options, so it was easy to match up with a standard U.S. electrical box (your experience may vary). Once the mounting plate is installed, the fixture is easily screwed onto the mounting plate.Having said that, you need to have some electrical and/or home renovation experience to install a product like this because it does not and should not plug in to an outlet. You have to hard-wire it, which means getting an electrician to install it or installing it yourself (not everyone is up for that).Finally, the install instructions are a bit thin. Biggest item not mentioned: since the light fixture itself twists onto the mounting plate, there is no room for wires below the mounting plate. Plan to use an electrical box, so you don't just stuff your wiring connections up into the ceiling to make everything fit flush.

These fixtures spread the light out better than similar products which only illuminate the area directly below the fixture. The frosted light cover directs light down as well as to the sides, so you don’t end up with a spotlight effect.The only negative is the installation procedure. If you have short electrical wires coming out of your ceiling electrical box you may find it difficult to insert the wires into the fixture. Instead of having wire leads coming out of the fixture, these fixtures require you to insert the existing wires into the fixture’s wire clips which is difficult if you don’t have long leads. To rectify the situation I inserted my own electrical wires into the fixture and used wire nuts to secure them to the electrical box wires.One other tip is to be sure to take a picture of the mounting bracket before you remove it from the fixture to begin installation. Pay attention to which way the bracket needs to face. If you accidentally attach the bracket upside down, which I did at first, it will make it very difficult to snap the fixture into the mounting bracket.

I purchased this for use on a home project and the ease of installation paid for itself. The functionality was what I was hoping for. Really brightened up the area. I will be using this seller in the future.

If youhave enough wire coming from the box to make it easy to connect (the fixture had no wires to connect to the house wiring), it would difficult to stuff that wiring back into the box in order to engage the fixture onto the mountin bracket. But, having a shorter amount of wire makes it very difficult to insert wite from the box into the fuxture's connectors, as you must turn the fixture almost 90 degrees to the ceiling in order to see what you're doing. After having finally getting it connected, it was way too bright for our good-sized bathroom. It would be a great light for a large room, other than the difficult hookup. I sent it back. P.S. I accomplished the hook up by first inserting short lengths of wire into the fixtures openings, then, attaching the other ends of thise wires to the relatively short length of wire available from the box. I don't know if I could have gotten the whole mess back in the box to allow the fixture to attach to the mounting bracket, as I tested it before trying to mount it, and it was clearly too bright. I then wnet to Lowe's and bout a similarity-sized LED fixture for about the same price with a conventional hookup. It's not warm white, like the returned one or the fluorescent one I replaced; it's cool white, but looks okay in the bath.

The product is a great value for the money. Make sure you have someone who is skilled at installing. Our building janitor did it for us. My husband would have been able to figure it out in his heyday. No way I could have done it myself though even with the instructions.The package I got had been opened. I assume someone like me may have gotten it and not have been able to figure out how to install it. There was nothing wrong with the product, however.Very happy with it and so was our installer/janitor who thought it as right for the space as I do. It is in a small hallway between our kitchen and pantry.

This CANNOT be a legal electrical device her in the USDesigned in Las Vegas. Made in China. Shame on you for selling this on Amazon.The wire clamps are nothing I’ve ever seen. The wires fall out at the slightest tug.The mounting mechanism is nonsense. Your fingers cannot fit between the fixture and ceiling to pull the tabs to mount it.

Vlotte levering en zeer eenvoudig te plaatsen. Mooi resultaat. Zeer tevreden.

very easy to install, very bright, customizable and easy to use.

mooie lamp en veel licht

Producto genial. Recomiendo su compra 100%. Viene muy completo. Fácil de montar. La iluminación es perfecta para el baño. Tono cálido.

Die Lepro 24W Deckenlampe ist eine vielseitige und leistungsstarke LED-Leuchte, die sich ideal für verschiedene Wohnbereiche eignet. Hier sind die Hauptmerkmale und Vorteile dieses Produkts:#### Design und Verarbeitungsqualität- **Größe und Design**: Mit einem Durchmesser von 28 cm hat die Lepro Deckenlampe eine kompakte Größe, die sich in nahezu jeden Raum harmonisch einfügt. Das schlichte und moderne Design passt zu vielen Einrichtungsstilen und sorgt für eine elegante Optik.- **Materialien**: Die Lampe ist aus hochwertigen Materialien gefertigt, die langlebig und robust sind. Sie wirkt gut verarbeitet und stabil.#### Lichtqualität- **Helligkeit**: Mit einer Lichtleistung von 2400 Lumen bietet die Lampe eine helle und gleichmäßige Ausleuchtung. Sie ist stark genug, um größere Räume wie Wohnzimmer, Schlafzimmer oder Küchen ausreichend zu beleuchten.- **Farbtemperatur**: Die Lampe strahlt ein warmweißes Licht mit 3000K aus, das eine gemütliche und einladende Atmosphäre schafft. Ideal für Wohnbereiche, in denen eine angenehme Lichtstimmung gewünscht ist.#### Funktionalität- **Energieeffizienz**: Mit 24W ist die Lepro Deckenlampe sehr energieeffizient und hilft dabei, Stromkosten zu sparen. Sie bietet eine hohe Lichtausbeute bei niedrigem Energieverbrauch.- **Wasserfestigkeit**: Dank der IP54-Zertifizierung ist die Lampe wasserfest und somit bestens für Badezimmer, Balkone oder andere Feuchträume geeignet. Sie ist gegen Spritzwasser und Staub geschützt, was ihre Langlebigkeit erhöht.#### Installation- **Einfache Montage**: Die Installation der Lampe ist unkompliziert und kann schnell erledigt werden. Sie wird mit allem notwendigen Montagematerial geliefert, sodass du keine zusätzlichen Werkzeuge oder Teile benötigst.- **Vielseitigkeit**: Die Lepro Deckenlampe kann in verschiedenen Räumen installiert werden, darunter Badezimmer, Schlafzimmer, Kinderzimmer, Wohnzimmer, Balkon, Flur und Küche. Ihre vielseitige Einsetzbarkeit macht sie zu einer praktischen Wahl für das ganze Haus.#### Vor- und Nachteile##### Vorteile- **Hohe Helligkeit** und gleichmäßige Ausleuchtung.- **Energieeffizient** mit 24W Leistung.- **Warmweißes Licht** (3000K) für eine angenehme Atmosphäre.- **IP54 wasserfest**, ideal für Feuchträume.- **Einfach zu installieren** und vielseitig einsetzbar.##### Nachteile- **Design**: Das schlichte Design könnte für manche Nutzer zu minimalistisch sein, die eine dekorativere Lampe bevorzugen.- **Kein Dimmfunktion**: Die Lampe bietet keine Möglichkeit zur Anpassung der Helligkeit, was für manche Anwendungen wünschenswert sein könnte.### FazitDie Lepro 24W Deckenlampe ist eine ausgezeichnete Wahl für diejenigen, die eine helle, energieeffiziente und vielseitige LED-Deckenleuchte suchen. Mit ihrer hohen Helligkeit, dem warmweißen Licht und der Wasserfestigkeit ist sie besonders geeignet für Badezimmer, aber auch für andere Wohnbereiche wie Schlafzimmer, Wohnzimmer, Küchen und Flure. Die einfache Installation und das schlichte Design machen sie zu einer praktischen und stilvollen Beleuchtungslösung. Insgesamt bietet die Lepro 24W Deckenlampe ein hervorragendes Preis-Leistungs-Verhältnis und erfüllt die Anforderungen an moderne Wohnraumbeleuchtung in hohem Maße.